Several Reasons You Might Have Low Water Pressure In Your Home
Low water pressure is a common problem for many homeowners, and this issue can be caused by a number of different things. If you want to find out what is causing this so you can get the problem fixed, you should call a plumbing contractor. Plumbers know exactly what to check to locate the problem, and they can perform all the necessary adjustments and repairs to help you get the water pressure you desire. Here are some of the things a plumber will check before suggesting getting a new water pump.
Clean Your Faucet Aerators
Inside each of your faucets and showerheads you will find a small aerator. This device is typically made of a silver mesh-like material, and it is designed to prevent particles of sand and other types of debris from coming through the faucets in your water. While these devices are important, they can also create issues. The main issue is that they can become clogged with debris. If this happens, it will restrict the water flow from coming through, and the result of this is poor water pressure.
The aerators on any of your faucets can become clogged at any time, but they all do not typically become clogged at once. If you have poor water pressure from just one sink, check the aerator. If you have poor water pressure in your entire home, it is not likely caused by clogged aerators.
Cleaning the aerators is easy to do, and you could even do this yourself. You must simply unscrew the end of the faucet and remove the aerator. You can then rinse it off and place it back on the device.
Clean Or Replace Your Shower Nozzle
If your water pressure is only low in your shower, there's a good chance it might be due to a clogged shower nozzle. If your shower nozzle is old, you may simply want to replace it. If it is relatively new, you can remove the entire thing and soak it in vinegar to clean it.
If you decide to replace it, you can choose a nozzle that is designed to offer high pressure. The newer types use less water than older nozzles, but they are able to do so in a way that does not sacrifice on water pressure.
Locate And Fix Any Water Leaks
Water leaks in a house can also cause pressure to drop, and this problem would typically cause the pressure in the entire home to drop. Finding out if a house has water leaks is easy to do if a home has city water, but it can be hard to do if a home is on a well. If you have city water, a plumber will typically shut the main water valve off to the house and check the meter beforehand and 15 minutes later to see if there is a change in number. If there is a change, it means there is a leak somewhere.
Without a meter on your house, a plumber will have to visually inspect all your faucets, appliances, and plumbing to determine if there is a leak. The plumber may also look around your house for signs of water damage.
When there is a leak, it means that water may be running all the time. As this happens, it will decrease the pressure to the remaining fixtures in your home. Not only will this cause you to waste water, but it can also lead to water damage in your house. Plumbing leaks should be fixed as quickly as possible to avoid further problems.
If you would like to find out why your water pressure is low and what you can do to fix this, you should contact a plumbing contractor, such as Trenchless Pipe Technologies, in your area today.
Share